| SPECIFICATIONS |
| Brand |
Gigabyte |
| Series |
Z790 UD AX |
| Model |
GA-Z790-UD-AX |
| CPU |
LGA1700 socket: Support for the 13th and 12th Generation Intel Core, Pentium Gold and Celeron Processors |
| L3 cache varies with CPU |
| Chipset |
Intel Z790 Express Chipset |
| Memory |
Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.) /6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules |
| 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory |
| Dual channel memory architecture |
| Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) |
| Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
| Support for Extreme Memory Profile (XMP) memory modules |
| (Please refer "Memory Support List" for more information.) |
| Onboard Graphics |
Integrated Graphics Processor-Intel HD Graphics support: |
| 1) 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz |
| * Support for HDMI 2.0 version and HDCP 2.3. |
| 2) 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz |
| * Support for DisplayPort 1.2 version and HDCP 2.3 |
| (Graphics specifications may vary depending on CPU support.) |
| Audio |
1) Realtek Audio CODEC |
| 2) High Definition Audio |
| 3) 2/4/5.1/7.1-channel |
| * You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings. |
| 4) Support for S/PDIF Out |
| LAN |
Realtek 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps) |
| Wireless Communication Module |
Intel Wi-Fi 6E AX210 |
| 1) WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands |
| 2) BLUETOOTH 5.3 |
| 3) Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate |
| (Actual data rate may vary depending on environment and equipment.) |
| Expansion Slots |
CPU: |
| 1) 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16) |
| * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
| Chipset: |
| 1) 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4) |
| 2) 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x1 (PCIEX1_4) |
| 3) 2 x PCI Express x1 slots, supporting PCIe 3.0 and running at x1 (PCIEX1_2, PCIEX1_3) |
| Support for AMD CrossFire technology (PCIEX16 and PCIEX4) |
| Storage Interface |
CPU: |
| 1) 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) |
| Chipset: |
| 1) 2 x M.2 connectors (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support) (M2Q_SB, M2P_SB) |
| 2) 6 x SATA 6Gb/s connectors |
| RAID 0, RAID 1, RAID 5, and RAID 10 support for NVMe SSD storage devices |
| RAID 0, RAID 1, RAID 5, and RAID 10 support for SATA storage devices |
| USB |
Chipset: |
| 1) 1 x USB Type-C port on the back panel, with USB 3.2 Gen 2x2 support |
| 2) 1 x USB Type-C port with USB 3.2 Gen 1 support, available through the internal USB header |
| 3) 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel |
| 4) 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header) |
| Chipset 2 USB 2.0 Hubs: |
| 1) 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) |
| Internal I/O Connectors |
1x 24-pin ATX main power connector |
| 2x 8-pin ATX 12V power connectors |
| 1x CPU fan header |
| 1x water cooling CPU fan header |
| 3x system fan headers |
| 1x system fan/water cooling pump header |
| 2x addressable LED strip headers |
| 2x RGB LED strip headers |
| 3x M.2 Socket 3 connectors |
| 6x SATA 6Gb/s connectors |
| 1x front panel header |
| 1x front panel audio header |
| 1x S/PDIF Out header |
| 1x USB Type-C header, with USB 3.2 Gen 1 support |
| 1x USB 3.2 Gen 1 header |
| 2x USB 2.0/1.1 headers |
| 1x serial port header |
| 2x Thunderbolt add-in card connectors |
| 1x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) |
| 1x reset button |
| 1x Q-Flash Plus button |
| 1x reset jumper |
| 1x Clear CMOS jumper |
| Back Panel Connectors |
1x USB Type-C port, with USB 3.2 Gen 2x2 support |
| 1x USB 3.2 Gen 2 Type-A port (red) |
| 4x USB 3.2 Gen 1 ports |
| 4x USB 2.0/1.1 ports |
| 2x SMA antenna connectors (2T2R) |
| 1x HDMI 2.0 port |
| 1x DisplayPort |
| 1x RJ-45 port |
| 3x audio jacks |
| I/O Controller |
iTE I/O Controller Chip |
| H/W Monitoring |
Voltage detection |
| Temperature detection |
| Fan speed detection |
| Water cooling flow rate detection |
| Fan fail warning |
| Fan speed control |
| * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. |
| BIOS |
1 x 256 Mbit flash |
| Use of licensed AMI UEFI BIOS |
| PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
| Form Factor |
ATX Form Factor |
| 30.5cm x 24.4cm |
