| SPECIFICATIONS |
| Brand |
Gigabyte |
| Series |
Aorus Extreme |
| Model |
GA-X670E-AORUS-XTREME |
| CPU |
AMD Socket AM5, support for : AMD Ryzen 7000 Series Processors |
| (Please refer "CPU Support List" for more information.) |
| Chipset |
AMD X670 |
| Memory |
Support for DDR5 6666(OC) / 6600(OC) / 6400(OC) / 6200(OC) / 6000(OC) / 5600(OC) / 5200 / 4800 / 4400 MT/s memory modules |
| 4 x DDR5 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory |
| Dual channel memory architecture |
| Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules |
| Support for AMD EXtended Profiles for Overclocking (AMD EXPO) and Extreme Memory Profile (XMP) memory modules |
| (Please refer "Memory Support List" for more information.) |
| Onboard Graphics |
Integrated Graphics Processor: |
| 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz |
| * Support for HDMI 2.0 version and HDCP 2.3. |
| 1 x DisplayPort, supporting a maximum resolution of 3840x2160@144 Hz |
| * Support for DisplayPort 1.4 version and HDR. |
| Audio |
Realtek ALC1220-VB CODEC |
| * The front panel line out jack supports DSD audio. |
| ESS ES9118 DAC chip |
| Support for DTS:X Ultra |
| High Definition Audio |
| 2/4/5.1-channel |
| *You can change the functionality of an audio jack using the audio software. To configure 5.1-channel audio, access the audio software for audio settings. |
| Support for S/PDIF Out |
| LAN |
Marvell AQtion AQC113C 10GbE LAN chip |
| (10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps) |
| Wireless Communication Module |
Intel Wi-Fi 6E AX210 |
| WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands |
| BLUETOOTH 5.3 |
| Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate |
| (Actual data rate may vary depending on environment and equipment.) |
| Expansion Slots |
CPU: |
| 1 x PCI Express x16 slot, supporting PCIe 5.0* and running at x16 (PCIEX16) |
| * Actual support may vary by CPU. |
| * The M2B_CPU and M2C_CPU slots share bandwidth with the PCIEX16 slot. When the M2B_CPU or M2C_CPU slot is populated, the PCIEX16 slot operates at up to x8 mode. |
| * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. |
| Chipset: |
| 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4) |
| 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x2 (PCIEX2) |
| Support for AMD CrossFire technology (PCIEX16 and PCIEX4) |
| Storage Interface |
CPU: |
| 1 x M.2 connector (Socket 3, M key, type 25110/2280 PCIe 5.0* x4/x2 SSD support) (M2A_CPU) |
| * Actual support may vary by CPU. |
| 3 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 5.0* x4/x2 SSD support (M2B_CPU/M2C_CPU/M2D_CPU) |
| * Actual support may vary by CPU. |
| Chipset: |
| 1. 6 x SATA 6Gb/s connectors |
| RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices |
| RAID 0, RAID 1, and RAID 10 support for SATA storage devices |
| USB |
CPU: |
| 1 x USB Type-C port on the back panel, with USB 3.2 Gen 2 support |
| 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel |
| CPU USB 2.0 Hub: |
| 4 x USB 2.0/1.1 ports on the back panel |
| Chipset: |
| 2 x USB Type-C ports, with USB 3.2 Gen 2x2 support (1 port on the back panel, 1 port available through the internal USB header) |
| 4 x USB 3.2 Gen 2 Type-A ports (red) on the back panel |
| 4 x USB 3.2 Gen 1 ports available through the internal USB headers |
| 4 x USB 2.0/1.1 ports available through the internal USB headers |
| Internal I/O Connectors |
1 x 24-pin ATX main power connector |
| 2 x 8-pin ATX 12V power connectors |
| 1 x CPU fan header |
| 1 x water cooling CPU fan header |
| 4 x system fan headers |
| 4 x system fan/water cooling pump headers |
| 2 x addressable LED strip headers |
| 2 x RGB LED strip headers |
| 1 x CPU cooler LED strip/RGB LED strip header |
| 4 x M.2 Socket 3 connectors |
| 6 x SATA 6Gb/s connectors |
| 1 x front panel header |
| 1 x front panel audio header |
| 1 x USB Type-C header, with USB 3.2 Gen 2x2 support |
| 2 x USB 3.2 Gen 1 headers |
| 2 x USB 2.0/1.1 headers |
| 1 x noise detection header |
| 1 x THB_U4 add-in card connector |
| 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) |
| 1 x power button |
| 1 x reset button |
| 2 x temperature sensor headers |
| 1 x reset jumper |
| 1 x Clear CMOS jumper |
| Voltage Measurement Points |
| Back Panel Connectors |
1 x Q-Flash Plus button |
| 1 x Clear CMOS button |
| 2 x SMA antenna connectors (2T2R) |
| 1 x DisplayPort |
| 1 x HDMI 2.0 port |
| 1 x USB Type-C port, with USB 3.2 Gen 2x2 support |
| 1 x USB Type-C port, with USB 3.2 Gen 2 support |
| 6 x USB 3.2 Gen 2 Type-A ports (red) |
| 4 x USB 2.0/1.1 ports |
| 1 x RJ-45 port |
| 1 x optical S/PDIF Out connector |
| 2 x audio jacks |
| I/O Controller |
iTE I/O Controller Chip |
| H/W Monitoring |
Voltage detection |
| Temperature detection |
| Fan speed detection |
| Water cooling flow rate detection |
| Fan fail warning |
| Fan speed control |
| * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. |
| Noise detection |
| BIOS |
1 x 256 Mbit flash |
| Use of licensed AMI UEFI BIOS |
| PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
| Unique Features |
Support for GIGABYTE Control Center (GCC) |
| * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. |
| Support for Q-Flash |
| Support for Q-Flash Plus |
| Support for Smart Backup |
| Bundled Software |
Norton Internet Security (OEM version) |
| LAN bandwidth management software |
| Operating System |
Support for Windows 11 64-bit |
| Support for Windows 10 64-bit |
| Form Factor |
E-ATX Form Factor; 30.5cm x 26.9cm |
